UMN:CLI

User Manual

 

SURPASS hiD 6615 S223/S323 R1.5

 

 

 

To define an 802.1p priory-to-queue map for 8 queues, use the following command.

Command

Mode

Description

 

 

 

 

 

Priority to queue number mapping, priority value (0-7)

 

 

according to 802.1p:

 

 

0 = lowest: best effort (be)

 

 

1: background (bg)

 

 

2: spare (spare)

qos map <0-7> <0-3>

Global

3: excellent effort (ee)

4: controlled load (cl)

 

 

 

 

5: video (video)

 

 

6: voice (voice)

 

 

7: network control (ctrl)

 

 

Queue value:

 

 

0-3: queue number

 

 

 

7.6.3.4Queue Parameter

To configure a queue parameter, use the following command.

Command

 

Mode

Description

 

 

 

 

 

qos ibp PORTS <1-8191>

 

 

Sets a ingress back-pressure:

 

 

PORTS: port numbers

 

 

 

 

 

 

 

 

 

qos pktlimit

PORTS <0-3>

<4-

 

Sets a maximum packet size per queue for egress port:

 

PORTS: port numbers

2047>

 

 

 

 

 

 

0-3: queue number

 

 

 

 

 

 

 

 

 

qos seglimit

PORTS <0-3>

<1-

Global

Sets a maximum segment per queue for egress port:

 

PORTS: port numbers

8191>

 

 

 

 

 

 

0-3: queue number

 

 

 

 

 

 

 

 

no qos ibp PORTS

 

 

 

 

 

 

Restroes it as a default.

no qos pktlimit PORTS <0-3>

 

 

 

 

 

 

no qos seglimit PORTS <0-3>

 

 

 

 

 

 

 

 

7.6.3.5Displaying QoS

To display a configuration of QoS, enter following command.

Command

Mode

Description

 

 

 

show qos

Enable

Shows the configuration of QoS for all ports.

 

 

show qos PORTS

Shows the configuration of QoS per each port.

Global

 

 

show qos buffer PORTS

Shows the configuration of a buffer per each port.

Bridge

 

 

show qos cpu

 

Shows the configuration of QoS for CPU packets.

 

 

 

7.6.4Admin Access Rule

For the hiD 6615 S223/S323, it is possible to block a specific service connection like tel- net, FTP, ICMP, etc with an admin access rule function.

150

A50010-Y3-C150-2-7619

Page 150
Image 150
Siemens S323 Admin Access Rule, Queue Parameter, Displaying QoS, To configure a queue parameter, use the following command