Siemens S223, S323 Enabling MVR, MVR Group Address, MVR IP Address, A50010-Y3-C150-2-7619 299

User Manual	UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

9.2.7.1Enabling MVR

To use the MVR, enable the MVR function with the following command.

Command	Mode	Description
mvr	Global	Enables MVR on the system.
no mvr		Disables MVR on the system.

9.2.7.2MVR Group Address

Statically configure a VLAN interface to receive multicast traffic sent to the multicast VLAN and the IP multicast address. An interface statically configured as a member of a group remains a member of the group until statically removed.

Command	Mode	Description
mvr vlan VLAN group GROUP-		Configures MVR group address.
	Global	GROUP-ADDR: specific group address (ex: a.b.c.d or
ADDR
		a.b.c.d-x.y.z.w)

To delete the statically configured MVR group address, use the following command.

Command	Mode	Description
no mvr vlan VLAN group		Deletes a MVR group address.
	Global	GROUP-ADDR: specific group address (ex: a.b.c.d or
GROUP-ADDR
		a.b.c.d-x.y.z.w)

9.2.7.3MVR IP Address

Statically configure a VLAN interface to receive multicast traffic sent to the multicast VLAN and the IP multicast address. An interface statically configured as a member of a group remains a member of the group until statically removed.

When a multicast server belongs to different network from user’s network, a multicast router operates as Layer 3 forwarding for each MVR VLAN. In this case, when an IGMP packet of a subscriber is transmitted to the multicast server, a source address of the IGMP packet may not match the network address of MVR VLAN. To handle such a prob- lem, you can replace a source address of an IGMP packet with one of the IP addresses of

MVR VLAN.

To configure a helper address to replace a source address of an IGMP packet, use the following command.

Command	Mode	Description
mvr vlan VLAN helper	Global	Configures MVR group address.
IP-ADDRESS		IP ADDRESS: specific IP address

A50010-Y3-C150-2-7619 299