Siemens S323 Changing Login Password, Management for System Account, Creating System Account

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

To disable password encryption, use the following command.

Command	Mode	Description
no service password-encryption	Global	Disables password encryption.

4.1.3Changing Login Password

To configure a password for created account, use the following command.

Command	Mode	Description
passwd [NAME]	Global	Configures a password for created account.

The following is an example of changing password.

	SWITCH(config)# passwd Siemens
	Changing password for Siemens
	Enter the new password (minimum of 5, maximum of 8 characters)
	Please use a combination of upper and lower case letters and numbers.
	Enter new password:junior95
	Re-enter new password:junior95
	Password changed.
	SWITCH(config)#
!	The password you are entering won’t be seen in the screen, so please be careful not to
	make mistake.

4.1.4Management for System Account

4.1.4.1Creating System Account

For the hiD 6615 S223/S323, the administrator can create a system account. In addition, it is possible to set the security level from 0 to 15 to enhance the system security.

To create a system account, use the following command.

Command	Mode	Description
user add NAME DESCRIPTION		Creates a system account.
	Global
user add NAME level <0-15>		Creates a system account with a security level.
DESCRIPTION

i

The account of level 0 to level 14 without any configuring authority only can use exit and help in Privileged EXEC View mode and cannot access to Privileged EXEC Enable mode. The account with the highest level 15 has a read-write authority.

42 A50010-Y3-C150-2-7619