Siemens S323 Applying Igmp Profile to the Filter Port, Max Number of Igmp Join Group, Ports count

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

9.2.8.4Applying IGMP Profile to the Filter Port

To apply the configured IGMP Profile to the filter port, use the following command.

Command	Mode	Description
ip igmp filter port PORTS profile		Configures IGMP profile.
	Global	PORTS: port number
<1-2147483647>
		1-2147483647: number of configured IGMP profile

To cancel the applying of the profile, use the following command.

Command	Mode	Description
no ip igmp filter port PORTS	Global	Disables an applied IGMP profile.
		PORTS: port number

To display the IGMP filter configuration, use the following command.

Command	Mode	Description
	Enable
show ip igmp filter [port PORTS]	Global	Shows a configuration.
	Bridge

9.2.8.5Max Number of IGMP Join Group

You can configure the maximum number of IGMP groups that a Layer 2 interface can join. To configure the maximum number of IGMP groups per port, use the following command.

Command	Mode	Description
		Configures the maximum number of IGMP groups.
ip igmp max-groups port PORTS	Global	PORTS: port number
count <0-2147483647>		0-2147483647: maximum number of IGMP groups that
		the port can join

To return to the default setting, use the following command.

Command	Mode	Description
no ip igmp max-groups port	Global	Returns to the default of no maximum.
PORTS count		PORTS: the number of port

302 A50010-Y3-C150-2-7619