Siemens S223, S323 Rule Configuration Mode, Tab .4 Main Commands of Bridge Configuration Mode

User Manual	UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

Tab. 3.4 shows a couple of main commands of Bridge Configuration mode.

Command	Description
auto-reset	Configures the system for automatic rebooting
dhcp-server-filter	Configures packet filtering of DHCP server.
erp	Configures ERP function
lacp	Configures LACP function.
lldp	Configures LLDP function
mac	Manages MAC address
mac-flood-guard	Configures mac-flood-guard.
mirror	Configures mirroring function.
oam	Configures EFM-OAM protocol
port	Sets port configuration
stp	Configures Spanning Tree Protocol
trunk	Configures trunk-function.
vlan	Configures VLAN function.

Tab. 3.4 Main Commands of Bridge Configuration Mode

3.1.5Rule Configuration Mode

You can open Rule Configuration mode using the command, rule NAME create, on Global Configuration mode.

If you open Rule Configuration mode, the system prompt is changed from SWITCH(config)# to SWITCH(config-rule[name])#.

Command	Mode	Description
rule NAME create	Global	Opens Rule Configuration mode.

On the Rule Configuration mode, it is possible to configure the condition and operational method for the packets to which the rule function is applied.

Tab. 3.5 shows a couple of important main commands of Rule Configuration mode.

Command	Description
apply	Configures rule configuration and applies it to the switch.
mac	Configures a packet condition by MAC address.
match	Configures an operational condition which meets the packet condition.
port	Configures a packet condition by port number.
priority	Configures the priority for rule.
vlan	Configures VLAN.

Tab. 3.5 Main Commands of Rule Configuration Mode

A50010-Y3-C150-2-7619 31