Siemens S223, S323 user manual MAC Table, A50010-Y3-C150-2-7619 161

User Manual	UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

To disable the configuration of port secure aging, use the following command.

Command	Mode	Description
no port security PORTS aging		Disables aging for only statistically configured secure
static		addresses.
no port security PORTS aging	Bridge	Disables port secure aging for all secure addresses on
time		a port.
no port security PORTS aging		Returns to the default condition. (absolute)
type

To display the configuration of port security, use the following command.

Command	Mode	Description
	Enable
show port security [PORTS]	Global	Shows port security on the port.
	Bridge

7.11MAC Table

A dynamic MAC address is automatically registered in the MAC table, and it is removed if there is no access to/from the network element corresponding to the MAC address during the specified MAC aging time. On the other hand, a static MAC address is manually reg- istered by user. This will not removed regardless of the MAC aging time before removing it manually.

To manage MAC table in the switch, use the following command.

Command	Mode	Description
		Specifies a static MAC address in the MAC table.
mac NAME PORT MACADDR		NAME: enter the bridge name.
		PORT: enter the port number.
	Bridge
		MACADDR: enter the MAC address.
mac aging-time <10-21474830>		Specifies MAC aging time:
		10-21474830: aging time (default: 300)

A50010-Y3-C150-2-7619 161