Siemens S323, S223 user manual Local OAM Mode, OAM Unidirection, Remote OAM

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

7.2.2Local OAM Mode

To configure Local OAM, use the following command.

Command	Mode	Description
oam local mode {active	Bridge	Configures the mode of local OAM.
passive} PORTS

i

Both request and loopback are possible for local OAM active. However, request or loop- back is impossible for local OAM passive.

7.2.3OAM Unidirection

When RX is impossible in local OAM, it is possible to send the information by using TX. To enable/disable the function, use the following command.

	Command		Mode	Description
oam local	unidirection	enable		Sends the information by using TX.
PORTS
			Bridge
oam local	unidirection	disable		Disables to transmit the information by using TX.
PORTS

7.2.4Remote OAM

To enable/disable remote OAM, use the following command.

Command	Mode	Description
oam remote oam admin <1-2>		Enables remote OAM.
enable PORTS
	Bridge
oam remote oam admin <1-2>		Disables remote OAM.
disable PORTS

To configure the mode of remote OAM, use the following command.

Command	Mode	Description
oam remote oam mode <1-2>	Bridge	Configures the mode of remote OAM.
{active passive} PORTS

120 A50010-Y3-C150-2-7619