Incline Display

Displays

LED Track

Program Indicators

 

 

Manual Indicator

 

 

Pulse Sensor

 

 

 

Key

Clip

CAUTION: Before operating the console, read the following precautions.

Do not stand on the walking belt when turn- ing on the power.

Always wear the clip while operating the treadmill.

Adjust the speed in small increments.

To reduce the possibility of electric shock, keep the console dry. Avoid spilling liquids on the console, and use only a sealed water bottle.

STEP-BY-STEP CONSOLE OPERATION

The console features a manual mode and four workout programs. When the manual mode is selected, the speed and incline of the treadmill can be changed with a touch of a button. As you exercise, the LED track and the four displays will provide continuous exercise feed- back—you can even measure your heart rate with the built-in pulse sensor. When one of the workout pro- grams is selected, the console will automatically control the speed as it guides you through an effective workout.

Before operating the

 

 

 

console, make sure that

 

 

 

 

On

 

the on/off switch near

 

 

 

Position

 

the power cord is in the

 

 

 

 

 

 

 

 

on position.

 

 

 

Next, make sure that the key is removed from the con-

8sole, and plug in the power cord (see HOW TO PLUG

IN THE POWER CORD on page 7).Note: If the key

is in the console when the power cord is plugged

in, the letters “PO” will flash in the SPEED display. If this occurs, remove the key.

Step onto the foot rails of the treadmill. Find the clip attached to the key (see the drawing above), and slide the clip onto the waistband of your clothing.

Follow the steps below to operate the console. Note: If there is a thin sheet of clear plastic on the face of the console, remove it.

Insert the key fully

1 into the console. When the key is in- serted, various indica- tors and displays on the console will light.

2 Pressmode. the MODE button to select the desired

When the key is in- serted, the manual

mode will be selected and the MANUAL indi-

cator will be lit. Note: If a workout program has

been selected, press the MODE button repeatedly to select the manual mode.

If you want to select one of the four workout pro- grams, press the MODE button. The upper pro-

gram indicator will light. To select one of the other three programs, press the MODE button repeatedly.

Page 8
Image 8
ProForm PCTL62590 STEP-BY-STEP Console Operation, Is in the console when the power cord is plugged, Insert the key fully