Siemens user manual Calling Command History, Surpass hiD 6615 S223/S323 R1.5

User Manual			UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
	Command	Mode	Description
	show list		Shows available commands of the current mode.
		All
	show cli		Shows available commands of the current mode with
			tree structure.

The following is an example of displaying list of available commands of Privileged EXEC Enable mode.

SWITCH# show list clear arp clear arp IFNAME clear ip bgp * clear ip bgp * in

clear ip bgp * in prefix-filter

clear ip bgp * ipv4 (unicastmulticast) in

clear ip bgp * ipv4 (unicastmulticast) in prefix-filter clear ip bgp * ipv4 (unicastmulticast) out

clear ip bgp * ipv4 (unicastmulticast) soft clear ip bgp * ipv4 (unicastmulticast) soft in clear ip bgp * ipv4 (unicastmulticast) soft out

-- more –

i

Press the <ENTER> key to skip to the next list.

In case of the hiD 6615 S223/S323 installed command shell, you can find out commands starting with specific alphabet. Input the first letter and question mark without space. The following is an example of finding out the commands starting “s” in Privileged EXEC En- able mode of hiD 6615 S223/S323.

SWITCH# s ?

show Show running system information ssh Configure secure shell

SWITCH# s

Also, it is possible to view variables you should input following after commands. After in- putting the command you need, make one space and input question mark. The following is an example of viewing variables after the command, write. Please note that you must make one space after inputting.

SWITCH# write ?

memory Write to NV memory

terminal Write to terminal SWITCH# write

3.2.2Calling Command History

In case of installed command shell, you do not have to enter repeated command again. When you need to call command history, use this arrow key <↑>. When you press the ar- row key, the latest command you used will be displayed one by one.

The following is an example of calling command history after using several commands.

A50010-Y3-C150-2-7619 37