Siemens S223, S323 Syslog Output Level without a Priority, A50010-Y3-C150-2-7619 135

User Manual	UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

7.5Syslog

The syslog is a function that allows the network element to generate the event notification and forward it to the event message collector like a syslog server. This function is enabled as default, so even though you disable this function manually, the syslog will be enabled again.

This section contains the following contents.

•Syslog Output Level

•Facility Code

•Syslog

•Disabling Syslog

•Displaying Syslog Message

•Displaying Syslog Configuration

7.5.1Syslog Output Level

Syslog Output Level without a Priority

To set a syslog output level, use the following command.

Command		Mode	Description
syslog output {emerg alert crit			Generates a syslog message of selected	level	or
err warning notice	info
			higher and forwards it to the console.
debug} console
syslog output {emerg alert crit			Generates a syslog message of selected level or
err warning notice info		Global	higher in the system memory.
debug} local {volatile non-			volatile: deletes a syslog message after restart.
volatile}			non-volatile: reserves a syslog message.
syslog output {emerg alert crit			Generates a syslog message of selected	level	or
err warning notice	info
			higher and forwards it to a remote host.
debug} remote IP-ADDRESS

To disable a specified syslog output, use the following command.

Command		Mode	Description
no syslog output {emerg alert
crit err warning notice info
debug} console
no syslog output {emerg alert
crit err warning notice info		Global	Deletes a specified syslog output.
debug} local {volatile	non-
volatile}
no syslog output {emerg alert
crit err warning notice info
debug} remote IP-ADDRESS

A50010-Y3-C150-2-7619 135