Siemens S323, S223 user manual Frequency of Retransmit, Tacacs Server for System Authentication

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

4.2.4.4Frequency of Retransmit

If there is no response from RADIUS server, the hiD 6615 S223/S323 is supposed to re- transmit an authentication request. To set the frequency of retransmitting an authentica- tion request, use the following command.

Command	Mode	Description
login radius retransmit <1-10>	Global	Sets the frequency of retransmit.
		1-10: Enters the times of retry (default: 3)

4.2.5TACACS Server

4.2.5.1TACACS Server for System Authentication

To add/delete the TACACS server for system authentication, use the following command.

Command	Mode	Description
		Adds the TACACS server with its information.
login tacacs server A.B.C.D KEY		A.B.C.D: IP address
	Global	KEY: authentication key value
no login tacacs server A.B.C.D		Deletes an added TACACS server.
		A.B.C.D: IP address

i

You can add up to 5 TACACS servers.

After adding the TACACS server, you should register interface of TACACS server con- nected to user’s switch. Use the following command.

Command	Mode	Description
login tacacs interface NAME		Registers interface of TACACS server connected to
A.B.C.D	Global	user’s switch.
no login tacacs interface		Clears TACACS server interface

4.2.5.2	TACACS Server Priority
	To specify the priority of a registered TACACS server, use the following command.
	Command		Mode	Description
	login tacacs server	move		Specifies the priority of RADIUS server.
			Global	A.B.C.D: TACACS server address
	A.B.C.D <1-5>
				1-5: the priority of TACACS server

4.2.5.3 Timeout of Authentication Request

After the authentication request, the hiD 6615 S223/S323 waits for the response from the TACACS server for specified time.

52 A50010-Y3-C150-2-7619