Siemens S223, S323 user manual Displaying Lldp Configuration, A50010-Y3-C150-2-7619 125

User Manual	UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

7.3.6Displaying LLDP Configuration

To display LLDP configuration, use the following command.

Command	Mode	Description
show lldp config PORTS	Enable	Shows LLDP configuration.
show lldp remote PORTS	Global	Show statistics for remote entries.
	Bridge
show lldp statistics PORTS		Shows LLDP operation and statistics.

To delete an accumulated statistics on the port, use the following command.

Command	Mode	Description
clear lldp statistics PORTS	Global	Deletes an accumulated statistics on the port.
	Bridge

The following is to configure to enable LLDP function on Bridge Configuration mode- through port number 10 of the switch and operate it.

SWITCH(bridge)# show lldp config 10

GLOBL:

-----------------------------------------------------------------------

MsgTxInterval	= 30
MsgTxHold	= 4	=> txTTL = 120
ReInitDelay	= 2
TxDelay	= 2

-----------------------------------------------------------------------

PORTS active	adminStatoptTLVs
10: disable	Tx<->Rx0xf= PortDesc, SysName, SysDesc, SysCap
SWITCH(bridge)# lldp enable 10
SWITCH(bridge)# lldp disable 10 portdescription
SWITCH(bridge)# lldp adminstatus 10		tx_only
SWITCH(bridge)# lldp msg txinterval		50
SWITCH(bridge)# lldp msg txhold 8
SWITCH(bridge)# show lldp config 10
GLOBL:

-----------------------------------------------------------------------

MsgTxInterval	= 50
MsgTxHold	= 8	=> txTTL = 400
ReInitDelay	= 2
TxDelay	= 2

-----------------------------------------------------------------------

PORTS active	adminStatoptTLVs
10: enable	Tx only 0xe= SysName, SysDesc, SysCap
SWITCH(bridge)#

A50010-Y3-C150-2-7619 125