Siemens S323, S223 user manual 154 A50010-Y3-C150-2-7619, Shows a current configuration of a rule

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

execution of command, apply. That is, if several rules being different only in one value should be created, then only the one changed value needs to be entered again.

7.6.4.6Modifying and Deleting Rule

To modify a rule, use the following command.

Command	Mode	Description
rule NAME modify admin	Global	Modifies an admin access rule, enter a rule name.

To delete a rule, use the following command.

Command	Mode	Description
no rule admin		Deletes an admin access rule, enter a rule name op-
	Global	tionally.
no rule all		Deletes all rules and admin access rules.

7.6.4.7Displaying Rule

The following command can be used to show a certain rule by its name, all rules of a cer- tain type, or all rules at once sorted by rule type.

Command	Mode	Description
show rule admin	Enable	Shows all admin access rules sorted by type.
show rule all		Shows all rules and admin access rules sorted by type.
	Global
show rule statistics		Shows rule statistics.
show rule-profile	Admin-rule	Shows a current configuration of a rule.

154 A50010-Y3-C150-2-7619