Siemens S323, S223 Debug Message for Remote Terminal, Disabling Syslog, Displaying Syslog Message

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

7.5.4Debug Message for Remote Terminal

To display a syslog debug message to a remote terminal, use the following command.

Command	Mode	Description
terminal monitor	Enable	Enables a terminal monitor function.
no terminal monitor		Disables a terminal monitor function.

i

Terminal monitor is not possible to be operational in local console.

7.5.5Disabling Syslog

To disable the syslog manually, use the following command.

Command	Mode	Description
no syslog	Global	Disables the syslog.

7.5.6Displaying Syslog Message

To display a received syslog message in the system memory, use the following command.

Command	Mode	Description
		Shows a received syslog message.
show syslog local {volatile		volatile: removes a syslog message after restart.
non-volatile} [NUMBER]	Enable	non-volatile: reserves a syslog message.
	Global	NUMBER: shows the last N syslog messages.
show syslog local {volatile		Shows the syslog messages from the latest one.
non-volatile}reverse
clear syslog local {volatile non-	Enable	Removes a received syslog message.
volatile}	Global

7.5.7Displaying Syslog Configuration

To display a configuration of the syslog, use the following command.

Command	Mode	Description
show syslog	Enable
		Shows a configuration of the syslog.
show syslog {volatile non-
	Global
volatile} information

138 A50010-Y3-C150-2-7619