Siemens S323, S223 Router Configuration Mode, Vrrp Configuration Mode, Command Mode Description

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

3.1.10Router Configuration Mode

To open Router Configuration mode, use the following command. The system prompt is changed from SWITCH(config)# to SWITCH(config-router)#.

Command	Mode	Description
router IP-PROTOCOL	Global	Opens Router Configuration mode.

!	Routing functionalities such as RIP, OSPF, BGP, VRRP and PIM-SM are only available for
	hiD 6615 S323. (Unavailable for hiD 6615 S223)

According to routing protocol way, Router Configuration mode is divided into BGP, RIP, and OSPF. They are used to configure each IP routing protocol.

Tab. 3.10 shows a couple of main commands of Router Configuration mode.

Command	Description
distance	Configures distance value to find better route.
neighbor	Configures neighbor router.
network	Configures network to operate each routing protocol.
redistribute	Registers transmitted routing information to another router’s table.

Tab. 3.10 Main Commands of Router Configuration Mode

3.1.11VRRP Configuration Mode

To open VRRP Configuration mode, use the following command. The system prompt is changed from SWITCH(config)# to SWITCH(config-router)#.

Command	Mode	Description
router vrrp INTERFACE GROUP-	Global	Opens VRRP Configuration mode.
ID

Tab. 3.11 shows a couple of main commands of Router Configuration mode.

Command	Description
associate	Configures associated IP address same with virtual router.
authentication	Configures password of virtual router group.
preempt	Activates/deactivates preempt.
track	Configures VRRP track.
vip-access	Configures the function of accessing associated IP address.
vr-priority	Assigns priority to virtual router.
vr-timers	Configures advertisement time, which means the interval that master
	router distributes its information to another virtual router.

Tab. 3.11 Main Commands of VRRP Configuration Mode

34 A50010-Y3-C150-2-7619