Siemens S323, S223 user manual Metrics for Redistributed Routes

UMN:CLI						User Manual
						SURPASS hiD 6615 S223/S323 R1.5
			Command		Mode	Description
	match interface INTERFACE					Transmits the information to specified interface only.
						INTERFACE: interface name
						Transmits the information matched with access-list.
	match	ip	address	{<1-199>		1-199: IP access list number
	<1300-2699> NAME}					1300-2699: IP access list number (expanded range)
						NAME: IP access list name
	match	ip	address	prefix-list		Transmits the information matched with prefix-list.
	NAME				Route-map	NAME: IP prefix list name
						Transmits information to only neighbor router in ac-
	match	ip	next-hop	{<1-199>		cess-list.
						1-199: IP access list number
	<1300-2699> NAME}
						1300-2699: IP access list number (expanded range)
						NAME: IP access list name
	match	ip	next-hop	prefix-list		Transmits information to only neighbor router in prefix-
						list.
	NAME
						NAME: IP prefix list name
			Command		Mode	Description
	match metric <0-4294967295>					Transmits information matched with specified metric,
						enter the metric value.
	set ip next-hop A.B.C.D				Route-map	Configures Neighbor router’s address.
						A.B.C.D: IP address of next hop
	set metric <1-2147483647>					Sets the metric value for destination routing protocol.
						1-2147483647: metric value

10.3.6Metrics for Redistributed Routes

The metrics of one routing protocol do not necessarily translate into the metrics of another. For example, the RIP metric is a hop count and the OSPF metric is a combination of five quantities. In such situations, an artificial metric is assigned to the redistributed route. Be- cause of this unavoidable tampering with dynamic information, carelessly exchanging routing information between different routing protocols can create routing loops, which can seriously degrade network operation. To prevent this situation, we configure metrics

To set metrics for redistributed routes, use the following command.

Command	Mode	Description
		Configures the equal metric of all routes transmitted by
default-metric <1-16>		routing protocol, enter the value.
	Router	1-16: default metric value
no default-metric [<1-16>]		Removes the equal metric of all routes transmitted by
		routing protocol.

i

The metric of all protocol can be configured from 0 to 4294967295. It can be configured from 1 to 16 for RIP.

366 A50010-Y3-C150-2-7619