Siemens S323, S223 Filters of Neighbor in PIM, PIM Hello Query, 306 A50010-Y3-C150-2-7619

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

the DR.

9.3.1.3Filters of Neighbor in PIM

Enable filtering of neighbors on the interface. When configuring a neighbor filter-PIM-SM will either not establish adjacency with the neighbor, or terminate adjacency with the ex- isting neighbors-if denied by filtering access list.

To configure the filtering of neighbor in PIM, use the following command.

Command	Mode	Description
ip pim neighbor-filter {<1-99>		Configures the filtering of neighbor in PIM.
		1-99: simple access list
ACCESS-LIST}
	Interface	ACESS-LIST: IP named standard access list
no ip pim neighbor-filter {<1-99>		Disables the filtering configuration.
ACCESS-LIST}

9.3.1.4PIM Hello Query

To configure a query hold time, use the following command.

Command	Mode	Description
ip pim query-holdtime		Configures the query hold time.
<1-65535>	Interface	1-65535: hello message hold time (unit: second)
no ip pim query-holdtime		Disables the query hold time configuration.

When configuring query hold time, if the configured value is less than the current query interval, it is refused.

To configure the frequency of hello interval value, use the following command.

Command	Mode	Description
ip pim query-interval <1-18724>		Configures the frequency of hello time.
	Interface	1-18724: hello message interval (unit: second)
no ip pim query-interval		Disables the hello message interval configuration.

306 A50010-Y3-C150-2-7619