Siemens S223 Restoring Default Configuration, To delete backup file, use the following command

User Manual	UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

To back up a system configuration file using FTP or TFTP, use the following command.

Command		Mode	Description
copy {ftp tftp} config upload			Uploads a file to ftp or fttp server with a name config-
{FILE-NAMEstartup-config}			ured by user.
copy {ftp tftp} config download			Downloads a file from ftp or fttp server with a name
{FILE-NAMEstartup-config}		Enable	configured by user.
copy {ftp tftp} os upload {os1			Uploads a file to ftp or fttp server with a name of os1 or
os2}			os2.
copy {ftp tftp} os	download		Downloads a file from ftp or fttp server with a name of
{os1 os2}			os1 or os2.

i

To access FTP to back up the configuration or use the backup file, you should know FTP user ID and the password. To back up the configuration or use the file through FTP, you can check the file transmission because hash function is automatically turned on.

To display a system configuration file, use the following command.

Command	Mode	Description
show startup-config	Enable	Shows a current startup configuration.
show config-list	Enable	Shows a list of configuration files.
	Global

The following is an example of displaying a list of configuration files.

SWITCH(config)# copy running-config SURPASShiD6615

SWITCH(config)# show config-list

=========================

CONFIG-LIST

=========================

l3_default SURPASShiD6615 SWITCH(config)#

To delete backup file, use the following command.

Command	Mode
erase config FILENAME	Enable

Description

Deletes backup file.

6.2.5Restoring Default Configuration

To restore a default configuration of the system, use the following command.

Command	Mode	Description
restore factory-defaults		Restores a factory default configuration.
	Global
restore layer2-defaults		Restores an L2 default configuration.
restore layer3-defaults		Restores an L3 default configuration.

A50010-Y3-C150-2-7619 93