Pengo Computer Accessories UBR7200 Configuration Tasks, Multipoint CLI Commands Classification

Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router

Configuration Tasks

Configuration Tasks

This section discusses the following configuration tasks for the multipoint fixed wireless feature:

•Multipoint CLI Commands Classification

•Overriding the Default Microcode Path

•Configuring IF Loopback (Optional)

•Configuring RF Loopback (Optional)

•Setting the Power Levels and Frequencies

•Configuring the Automatic Level Control (ALC)

•Configuring the Modulation Profile for a Wireless Link

Multipoint CLI Commands Classification

The multipoint headend system CLI commands are classified as follows. Click on the link to go to the list of commands under each class.

•Startup Commands

•Installation and Configuration Commands

•Verification Commands

•Operating Commands

•Monitoring Commands

•Troubleshooting Commands

Note This classification is made to help the user in chunking the commands. Some of the commands can be listed under any of these groups.

Cisco IOS Release 12.1(5)XM

6