Pengo Computer Accessories UBR7200 manual Syntax Description Defaults, Radio arp No radio arp

Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router

radio arp

radio arp

Syntax Description

Defaults

The Reverse Address Resolution Protocol (RARP) is an Internet protocol that is used to map IP addresses to MAC addresses on computers and other equipment installed on the wireless network. To activate RARP requests so that the Cisco uBR7200 series can perform IP address resolution on the downstream path, use the radio arp interface configuration command. To disable, use the no form of this command.

radio arp

no radio arp

This command has no arguments or keywords.

ARP is activated by default.

Command Modes

Command History

Interface configuration

ReleaseModification

12.1(3)XQ1 This command was introduced.

Examples	The following example shows how to activate ARP requests:
	Router(config-if)# radio arp
Related Commands	Command	Description
	show running-config	Shows if RARP has been activated or deactivated.

Cisco IOS Release 12.1(5)XM

36