Pengo Computer Accessories UBR7200 manual Radio upstream range-backoff, 107

Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router

radio upstream range-backoff

radio upstream range-backoff

To set fixed start and stop values for ranging backoff on the upstream ports, use the radio upstream range-backoffinterface configuration command. To set the ranging backoff values to the default start and end values, use the no form of this command.

radio upstream n range-backoff start-valueend-value[auto]

no radio upstream n range-backoff

Syntax Description	n	Specifies the upstream port number.
	start-value	Specifies the start ranging backoff value. Valid start values are 0 to 15. The
		default start value is 0.
	end-value	Specifies the end ranging backoff value. Valid end values are 0 to 15. The
		default end value is 4.
	auto	Specifies the automatic change data backoff value.
	The default initial ranging value is auto.
Defaults

Command Modes

Command History

Interface configuration

ReleaseModification

12.1(3)XQ1 This command was introduced.

Examples	The following example shows how to set the start and end ranging backoff values to 2 and 4,
	respectively, for upstream port 2:
	UBR(config-if)#radio upstream 2 range-backoff 2 4
Related Commands	Command	Description
	radio upstream	Sets the initial ranging start and end backoff values.
	data-backoff

Cisco IOS Release 12.1(5)XM

107