Pengo Computer Accessories UBR7200 manual Radio flap-list miss-threshold

Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router

radio flap-list miss-threshold

radio flap-list miss-threshold

To specify the miss threshold for recording a flap-list event, use the radio flap-listmiss-thresholdglobal configuration command. A miss is the number of times a radio subscriber does not acknowledge a MAC layer keep-alive message from a subscriber unit. When the number of misses exceeds the threshold, the radio subscriber unit is placed in the flap list. To disable the miss threshold as a criterion for adding a radio subscriber unit to the flap list, use the no form of this command.

radio flap-list miss-threshold threshold-num

no radio flap-list miss-threshold

Syntax Description	threshold-num	The miss threshold value specified by the user. Any subscriber that misses
		more than the specified number is placed in the flap list.
Defaults	No default behavior or values.

Command Modes

Command History

Global configuration

ReleaseModification

12.1(3)XQ1 This command was introduced.

Examples	The following example shows how to set the miss threshold to 50:
	CMTS01(config)# radio flap-list miss-threshold 50
Related Commands	Command	Description
	clear radio flap-list	Clears the current radio flap-list entries for a specific subscriber unit or all
		subscriber units.
	radio flap-list aging	Specifies the number of days to record and retain flapping activity on a radio
		subscriber unit in the flap-list table.
	radio flap-list	Sets the radio flap list insertion time.
	insertion-time
	radio flap-list size	Specifies the maximum number of the radio subscriber units to be reported
		in the radio flap-list table.
	show radio flap-list	Displays the radio flap list of a wireless modem card.

Cisco IOS Release 12.1(5)XM

47