Pengo Computer Accessories UBR7200 manual Pppoe enable No pppoe enable, Show interface

Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router

pppoe enable

pppoe enable

To enable Point-to-Point Protocol over Ethernet (PPPoE) termination on the radio interface, use the pppoe enable interface configuration command. To disable, use the no form of this command.

pppoe enable

no pppoe enable

Syntax Description This command has no arguments or keywords.

Defaults By default PPPoE is disabled.

Command Modes

Command History

Interface configuration

ReleaseModification

12.1(3)XQ1 This command was introduced on the fixed wireless multipoint product.

Usage Guidelines	The pppoe enable command and the pppoe-forwardingcommand cannot be configured at the same
	time. You can configure only one or the other at any given time.
Examples	The following example shows how to enable PPPoE on the radio interface:
	Router(config-if)# pppoe enable
Related Commands	Command	Description
	pppoe-forwarding	Enables PPPoE forwarding on the router.
	show interface	Displays information about whether or not PPPoE termination or PPPoE
		forwarding is enabled.

Cisco IOS Release 12.1(5)XM

28