Pengo Computer Accessories UBR7200 manual Show radio qos profile number verbose, 157

Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router

show radio qos profile

show radio qos profile

To verify whether a quality-of-service (QoS) profile has been created, and to see how it has been configured, use the show radio qos profile EXEC command.

show radio qos profile [number verbose]

Syntax Description	number	Specifies the class index number. Valid range is 1 to 255.
	verbose	Displays detailed information on the QoS profile.
Defaults	No default behavior or values.

Command Modes

Command History

EXEC

ReleaseModification

12.1(3)XQ1 This command was introduced.

Usage Guidelines If you have difficulty, check the following:

•Make sure that you are in EXEC mode.

•Make sure that you typed the correct QoS profile number and profile elements when you used the command.

•Subscriber units that register continuously and fail consume more resources than subscriber units that stay registered. For customers who do not pay for service, assign QoS profile 3.

Examples		The following example shows how to display a QoS profile table:
		CMTS01#	show	radio qos	profile
		Service	Prio	Max	Guarantee Max		Max tx TOS		TOS	Create	B
		class		upstream	upstream	downstream burst		mask value		by	priv
				bandwidth	bandwidth	bandwidth					enab
	1		0	0	0	0	0	0x0	0x0	cmts	no
	2		0	64000	0	1000000	0	0x0	0x0	cmts	no
	3		0	1000	0	1000	0	0x0	0x0	cmts	no
	4		7	2000000	100000	4000000	0	0x0	0x0	cm	yes
Related Commands		Command			Description

radio qos profile Configures the QoS profile.

Cisco IOS Release 12.1(5)XM

157