Pengo Computer Accessories UBR7200 manual Radio flap-list size size, No radio flap-list

Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router

radio flap-list size

radio flap-list size

To specify the use the radio value, use the

maximum number of the radio subscriber units to be reported in the radio flap list tables, flap-list size global configuration command. To set the flap list table size to the default no form of this command.

		radio flap-list size size
		no radio flap-list
Syntax Description	size	The flap-list table size that is specified by the user. Valid values are 1 to
		8191.
Defaults	No default behaviors or values.

Command Modes

Command History

Global configuration

ReleaseModification

12.1(3)XQ1 This command was introduced.

Examples	The following example specifies the flap-list size to 10:
	Router(config)# radio flap-list 10
Related Commands	Command	Description
	clear radio flap-list	Clears the current radio flap-list entries for a specific subscriber unit or all
		subscriber units.
	radio flap-list aging	Specifies the number of days to record and retain flapping activity on a radio
		subscriber unit in the flap-list table.
	radio flap-list	Sets the radio flap list insertion time.
	insertion-time
	radio flap-list	Sets the miss-threshold for recording a flap-list event.
	miss-threshold
	show radio flap-list	Displays the radio flap list of a wireless modem card.

Cisco IOS Release 12.1(5)XM

48