Pengo Computer Accessories UBR7200 manual Maint-range, Sm-data, Power, Null, Short-data, Long-data

Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router

radio snapshot

Defaults

Command Modes

Command History

maint-range	Keeps the link between a subscriber unit and headend “alive” even if
	data is not being transmitted. Snapshot is taken when a stationary range
	burst is received.
sm-data	Keeps the link between a subscriber unit and headend “alive” even if
	data is not being transmitted. Snapshot is taken when a stationary rang-
	ing data burst is received.
ra	Snapshot is taken when request access burst is received.
power	Snapshot is taken when automatic level control (ALC) burst is received.
null	Snapshot is taken when NULL burst is received. It measures ambient
	and calibration noise.
short-data	Snapshot is taken when data burst is received. It measures the actual
	traffic burst.
long-data	Snapshot is taken when data burst is received. It measures the actual
	traffic burst.
inr-data	Snapshot is taken when initial range data burst is received.
cable-pad	Snapshot is taken when cable-pad burst is received.
No default behavior or values.

Interface configuration

ReleaseModification

12.1(3)XQ1 This command was introduced.

Usage Guidelines A snapshot is a specified amount of data captured from the wireless modem card.

When you issue a snapshot request, as many as four simultaneous radio signal attributes can be captured. The four attributes are specified by the bitwise OR operation data of as many as four of the snapshot types.

Examples	The following example shows how to create a snapshot specification for dsprx0:
	Router(config-if)#radio snapshot dsprx0 1 initial-ranging

Cisco IOS Release 12.1(5)XM

93