Pengo Computer Accessories UBR7200 manual Radio flap-list insertion-time

Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router

radio flap-list insertion-time

radio flap-list insertion-time

To set the radio flap list insertion time, use the radio flap-listinsertion-timeglobal configuration command. To disable, use the no form of this command.

radio flap-list insertion-time seconds

no radio flap-list insertion-time

Syntax Description	seconds	Specifies the frequency for the flap list insertion request. The valid range is
		60 to 86400 seconds. When a radio subscriber unit makes an insertion
		request more frequently than the amount of time defined by this command,
		the radio subscriber unit is placed in the flat list for activity recording.
Defaults	No default behavior or values.

Command Modes

Command History

Global configuration

ReleaseModification

12.1(3)XQ1 This command was introduced.

Examples	The following example shows how to set the insertion time to 62 seconds:
	Router(config)# radio flap-list insertion-time 62
Related Commands	Command	Description
	clear radio flap-list	Clears the current radio flap-list entries for a specific subscriber unit or all
		subscriber units.
	radio flap-list aging	Specifies the number of days to record and retain flapping activity on a radio
		subscriber unit in the flap-list table.
	radio flap-list	Sets the miss-threshold for recording a flap-list event.
	miss-threshold
	radio flap-list size	Specifies the maximum number of the radio subscriber units to be reported
		in the radio flap-list table.
	show radio flap-list	Displays the radio flap list of a wireless modem card.

Cisco IOS Release 12.1(5)XM

46