Pengo Computer Accessories UBR7200 Clear radio flap-list, All, ReleaseModification, Examples

Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router

clear radio flap-list

clear radio flap-list

To clear the current radio flap list entries for a specific subscriber unit or for all subscriber units, use the clear radio flap-listEXEC command.

clear radio flap-list [MAC-addressall]

Syntax Description

Defaults

Command Modes

Command History

Usage Guidelines

MAC-address	Specifies the MAC address to clear the flap-list entries for a specific
	wireless modem card.
all	Clears the entries for all the wireless modems in the flap-list.

No default behavior or values.

EXEC

ReleaseModification

12.1(3)XQ1 This command was introduced.

When using this command, make sure that:

•You are in global configuration mode when you enter this command.

•You have recorded and analyzed all of the flapping activity on the radio modem before you clear the flap list.

Examples	The following example shows how to clear the entries in the radio flap list for the subscriber unit with
	a specific MAC address:
	CMTS01(config)# clear radio flap-list 0010.7b6b.5d1d
Related Commands	Command	Description
	radio flap-list aging	Specifies the number of days to record and retain flapping activity on a radio
		subscriber unit in the flap list table.
	radio flap-list	Sets the radio flap-list insertion time.
	insertion-time
	radio flap-list	Sets the miss-threshold for recording a flap-list event.
	miss-threshold
	radio flap-list size	Specifies the maximum number of radio subscriber units to be reported in
		the radio flap-list table.
	show radio flap-list	Displays the radio flap-list of a wireless modem card.

Cisco IOS Release 12.1(5)XM

21