Pengo Computer Accessories UBR7200 manual Down-change, Pos-crossing, Neg-crossing

Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router

radio timeline

Defaults

Command Modes

Command History

down-change	Specifies that the threshold condition is met when the negative
	change of the value being monitored is greater than the threshValue.
pos-crossing	Specifies that the threshold condition is met when the value being
	monitored does a positive crossing (positive increase) of the
	threshValue.
neg-crossing	Specifies that the threshold condition is met when the value being
	monitored does a negative crossing (negative increase) of the
	threshValue.
postTrigBufMgt	Specifies the position (position 1 or 2) of the trigger in the data
	collected. If the trigger position is 1, then most of the data collected
	before the trigger is returned. If the trigger position is 2, most of the
	data returned is captured after the occurrence of the trigger.
No default behavior or values.
Interface configuration

ReleaseModification

12.1(3)XQ1 This command was introduced.

Usage Guidelines	A timeline is a sequence of data values collected for a specified attribute. The amount of data collected
	is controlled by the size parameter. The maximum size is 1000 points.
	Collection starts as soon as the command succeeds, and continues until the Trigger option occurs or the
	radio interface radio tl-stop command is entered.
Note	Histograms and timelines share the same digital signal process (DSP) memory. A total of
	10 histograms and timelines can be created on a single DSP. There are a total of 8 locations
	for fine histograms and timelines and 5 locations for coarse histograms. The combination
	of histograms and timelines must be less than 10.
Examples	The following example shows how to configure a timeline specification. The collection process starts
	as soon as the command succeeds. It collects a timeline for sirn-ant1. The timeline is collected on
	channel 3. The timeline size is 600 points. The rest of the parameters are optional and the system picks
	default values.
	UBR04# radio timeline sinr-ant1 3 600

Cisco IOS Release 12.1(5)XM

99