Pengo Computer Accessories UBR7200 Radio upstream shutdown, Subscriber unit to the headend, 109

Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router

radio upstream shutdown

radio upstream shutdown

To activate the radio frequency carrier on the upstream ports, use the radio upstream shutdown command. Each upstream port must be activated to enable upstream data from the subscriber units to the Cisco uBR7200 series. To enable upstream data traffic, use the no form of this command.

radio upstream portnum shutdown

no radio upstream portnum shutdown

Syntax Description	portnum	Specifies the upstream port number. Valid values are o to 3.
Defaults	The upstream data traffic is disabled.

Command Modes

Command History

Interface configuration

ReleaseModification

12.1(3)XQ1 This command was introduced.

Examples	The following example shows how to activate upstream port 2 to enable upstream data flow from the
	subscriber unit to the headend:
	Router(config-if)#radio upstream 2 shutdown

Cisco IOS Release 12.1(5)XM

109