Pengo Computer Accessories UBR7200 manual Show controllers radio if, 116

Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router

show controllers radio if

show controllers radio if

To display the IF hardware information for the specified radio interface, use the show controllers radio if EXEC command. To disable this function, use the no form of this command.

show controllers slot/port radio if

no show controllers slot/port radio if

Syntax Description	slot/port	Specifies the slot and port numbers for the specified radio interface.
Defaults	No default behaviors or values.

Command Modes

Command History

EXEC

ReleaseModification

12.1(3)XQ1 This command was introduced.

Usage Guidelines The following IF information is displayed:

•The IF board identification and capability information obtained from the IF board's EEPROM or NVS.

•The IF board control (ctrl reg) information.

•Alarm status information.

Cisco IOS Release 12.1(5)XM

116