Pengo Computer Accessories UBR7200 manual 160

Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router

show radio subscriber

Table 4 show radio subscriber Field Descriptions (continued)

Field	Description
Modem State	The status of the modem when it was last polled. Possible states
	are:
	init(o)—Option file transfer was started
	init(t)—Time-of-day (TOD) exchange was started
	init(r1)—Modem sent initial ranging
	init(r2)—Modem is ranging
	init(rc)—Ranging is complete
	init(d)—Dynamic Host Configuration Protocol (DHCP) request
	was received
	init(i)—DHCP reply was received; IP address assigned
	online—Modem registered; enabled for data
	online(d)—Modem registered but network access for the cable
	modem is disabled
	online(pk)—Modem registered; baseline privacy interface (BPI)
	enabled, and key encryption key (KEK) is assigned
	online(pt)—Modem registered; BPI enabled, and traffic
	encryption key (TEK) is assigned
	reject(m)—Modem did attempt to register; registration was
	refused due to bad mic
	reject(c)—Modem did attempt to register; registration was
	refused due to bad COS
	reject(pk)—KEK modem key assignment is rejected
	reject(pt)—TEK modem key assignment is rejected
	offline—Modem is considered to be offline.
	Offline Time—Time the modem went offline. The format is same
	as other show radio subscriber commands (month, day, time, and
	year info).
Offline Time	For offline modems, the time the modem went offline.
Previous State	For offline modems, the status prior to going offline. See Modem
	State for definitions.
Rx Power	This field is not currently used.
SM Exhaust Count	The number of times the headend declared that modem to be
	offline. The modem could be marked offline due to various
	reasons (modem went dead, modem has not been active for a
	while, and so on).
Access group	The access group number.

Cisco IOS Release 12.1(5)XM

160