Pengo Computer Accessories UBR7200 manual Radio upstream data-backoff, Auto, 103

Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router

radio upstream data-backoff

radio upstream data-backoff

To set fixed start and stop values for initial ranging backoff on the upstream port, use the radio upstream data-backoffinterface configuration command. To set the initial ranging backoff values to the default start and end values, use the no form of this command.

radio upstream n data-backoff start-valueend-value[auto]

no radio upstream n data-backoff

Syntax Description	n	Specifies the upstream port number.
	start-value	Specifies the initial ranging start backoff value. Valid start values are 0 to
		15; 0 is the default start value.
	end-value	Specifies the initial ranging end backoff value. Valid end values are 0 to 15;
		4 is the default end value.
	auto	Specifies the automatic changed data backoff value.
	The default initial ranging value is auto.
Defaults

Command Modes

Command History

Interface configuration

ReleaseModification

12.1(3)XQ1 This command was introduced.

Examples	The following example shows how to set the initial ranging start and end backoff values to 2 and 4,
	respectively, for upstream port 2:
	UBR(config-if)#radio upstream 2 data-backoff 2 4
Related Commands	Command	Description
	radio upstream	Sets the start and end ranging backoff values.
	range-backoff

Cisco IOS Release 12.1(5)XM

103