Pengo Computer Accessories UBR7200 manual Show interface radio snap-data, 135

Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router

show interface radio snap-data

show interface radio snap-data

To display the data captured for the snapshot specification, use the show interface radio snap-dataprivileged EXEC command.

show interface radio slot/port snap-data dspNum snapshotType

Syntax Description	slot/port	The slot and port address.
	dspNum	The digital signal process (DSP) number (dsprx0, dsprx1, dsprx2, or
		dsprx3).
	snapshotType	Specifies the snapshot type. User can specify the bitwise OR value of
		as many as four of the following values in hexdecimal:
		0x1—raw burst data received from a subscriber through antenna 1
		0x2—raw burst data received from a subscriber through antenna 2
		0x4—frequency spectrum received from antenna 1
		0x8—frequency spectrum received from antenna 2
		0x10—channel inpulse response for antenna 1 (what the physical chan-
		nel looks like between the headend and the subscriber end)
		0x20—channel inpulse response for antenna 2 (what the physical chan-
		nel looks like between the headend and the subscriber end)
		0x40—frequency domain of the channel-inpulse response for antenna 1
		(for a group of subscriber units on an upstream channel)
		0x80—frequecy domain of the channel-inpulse response for antenna 2
		(for a group of subscriber units on an upstream channel)
		0x100—frequency domain of the channel-inpulse response for antenna 1
		(for a specific subscriber ID)
		0x200—frequency domain channel-inpulse response for antenna 2 (for a
		specific subscriber ID)
		0x400—Codec data
		0x800—interference estimate for antenna 1
		0x1000—interference estimate for antenna 2
		0x200000—TSID power array for power data burst or received power
		wavelength for the up synchronization process. Shows a snapshot of sub-
		scribers on an ALC window.
		0x400000—correlation of power vector and power mask of the upstream
		ranging signal (power for initial ranging)
		0x800000—initial ranging time domain channel for antenna 1
		0x1000000—initial ranging time domain channel for antenna 2
		0x2000000— initial ranging time domain channel for antenna 1 and
		antenna 2 combined
		0x4000000—ranging smoothed time domain channel power
Defaults	No default behavior or values.
Command Modes	Privileged EXEC

Cisco IOS Release 12.1(5)XM

135