Pengo Computer Accessories UBR7200 manual Radio metrics-threshold-channel

Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router

radio metrics-threshold-channel

radio metrics-threshold-channel

To configure a limit on the percentage of error codewords threshold, use the radio metrics-threshold-channelinterface configuration command. When this limit is exceeded in a 1-hour period, alarms are generated to notify the user. Minor alarms are generated and displayed on the console when the specified 1-hour threshold is exceeded. To force the thresholds back to the default values, use the no form of this command.

radio metrics-threshold-channel channel CERThresh

no radio metrics-threshold-channel channel CERThresh MINCodeword

Syntax Description	channel	Specifies the channel ID numbers, which are 0 to 3.
	CERThresh	Specifies the percentage of error codewords threshold.
	MINCodeword	Specifies the minimum number of codewords to be received by subscriber
		unit.
Defaults	No default behaviors or values.

Command Modes

Command History

Interface configuration

ReleaseModification

12.1(3)XQ1 This command was introduced.

Usage Guidelines	All link metrics are measured in codewords, where a codeword is a unit (228 bytes) of data transmission
	over the radio link. The codeword contains user data, error counts, and collation information so that
	successive codewords can be reconstructed at the receiving end of the transmitted data.
Examples	The following example shows how to configure threshold for channel 2, such that if more than 10.05
	percent of the received codewords in an hour are error codewords, the minor alarm is generated:
	UBR04(config-if)#radio metrics-threshold-channel 1hour 2 999

Cisco IOS Release 12.1(5)XM

72