Pengo Computer Accessories UBR7200 manual Command Description, 152

Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router

show radio flap-list

Table 3	Show radio flap-list Command Description (continued)
Power		Not used for radio modem. The value is always zero.
Adjustments
(p-adj)
Flap		The flap counter indicates the number of times the modem has flapped. This counter is incremented
		when one of the following events is detected:
			• Unusual modem insertion or reregistration attempts. The Flap and the Ins counters are incremented
			when the modem tries to reestablish the RF link with the headend within a period of time that is
			less than the user-configurable insertion interval value.
			• Abnormal miss/hit ratio. The flap counter is incremented when N consecutive misses are detected
			after a hit, where N can be user-configurable with a default value of 6.
Time		Time is the time stamp indicating the last time the modem flapped. The value is based on the clock
		configured on the local Cisco uBR7200 series. If no time is configured, this value is based on the current
		uptime of the Cisco uBR7200 series. When a modem meets one of the three flap list criteria, the flap
		counter is incremented and time is set to the current time.
Related Commands			Command	Description
			clear radio flap-list	Clears the current radio flap-list entries for a specific subscriber unit or all
				subscriber units.
			radio flap-list aging	Specifies the number of days to record and retain flapping activity on a radio
				subscriber unit in the flap-list table.
			radio flap-list	Sets the radio flap-list insertion time.
			insertion-time
			radio flap-list	Sets the miss-threshold for recording a flap-list event.
			miss-threshold
			radio flap-list size	Specifies the maximum number of the radio subscriber units to be reported
				in the radio flap-list table.

Cisco IOS Release 12.1(5)XM

152