Pengo Computer Accessories UBR7200 manual Show controllers radio, 113

Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router

show controllers radio

show controllers radio

To display all or a subset of attributes of a particular modem card, use the show controllers radio privileged EXEC command.

show controllers radio slot-num/port-num[{if rf fir codec rfsm rxdsp txdspus ds host }]

Syntax Description	slot-num	Positive integer representing the Cisco uBR7200 series slot number.
	port-num	Positive integer representing the port number on that slot.
	if	(version, freq, register1):
		• Version is the name, version of the module.
		• Freq is the current operating frequency.
		• Register1 is the IF Register 1.
	rf	(version, freq, power)
		• Version is the name, version of the module.
		• Freq is the current operating frequency.
		• Power is the minimum, maximum power capacity.
	fir	(version, firThresh,)
		• Version is the name, version of the module.
		• firThresh is the queue threshold.
	codec	(version, rsDecodeErrThresh, rdDecodeErrBytes)
		• Version is the name, version of the module.
		• rsDecodeErrThresh is the decode error threshold.
		• rdDecodeErrBytes are the decode error bytes.
	rfsm	Radio FSM task information.
	rxdsp	Receiving digital signal process (DSP).
	txdsp	Transmitting DSP.
	us	Upstream configuration information.
	ds	Downstream configuration information.
	host	Host FPGA subsystem registers.

Defaults

Command Modes

Command History

No default behavior or values.

Privileged EXEC

ReleaseModification

12.1(3)XQ1 This command was introduced.

Cisco IOS Release 12.1(5)XM

113