Pengo Computer Accessories UBR7200 manual Radio ra-backoff No radio ra-backoff

Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router

radio ra-backoff

radio ra-backoff

Syntax Description

Defaults

Command Modes

Command History

To turn on the request access (RA) backoff, use the radio ra-backoffinterface configuration command. The RA power control loop is used for minimizing interference on the upstream channels upon RA collisions. To turn off the RA backoff at the headend, use the no form of this command.

radio ra-backoff

no radio ra-backoff

This command has no arguments or keywords.

RA is off by default.

Interface configuration

ReleaseModification

12.1(3)XQ1 This command was introduced.

Usage Guidelines

Examples

When the RA backoff is turned on at the headend, the RA power for each subscriber unit is reduced to 3 dB. This is a one-time power reduction. When the RA backoff is turned off (default), all subscriber units restore their RA power to the highest setting.

The following example shows how to turn on the RA power:

Router(config-if)# radio ra-backoff

Related Commands	Command	Description
	show interface radio slot/port	Displays the current RA setting.
	alc

Cisco IOS Release 12.1(5)XM

85