Siemens S223, S323 Disabling Snmp Trap, To disable Snmp trap, use the following command, Node

User Manual	UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

snmp trap dhcp-lease

snmp trap fan

snmp trap power

snmp trap module

Global

Configures the system to send SNMP trap when no more IP address that can be assigned in the subnet of DHCP server is left.

Configures the system to send SNMP trap when the fan begins to operate or stops.

Configures the system to send SNMP trap when any problem occurs in power.

Configures the system to send SNMP trap when there is any problem in module.

7.1.8.4Disabling SNMP Trap

To disable SNMP trap, use the following command.

Command	Mode	Description
no snmp trap auth-fail
no snmp trap cold-start
no snmp trap link-up PORTS
[NODE]
no snmp trap link-down PORTS
[NODE]
no snmp trap cpu-threshold	Global	Disables each SNMP trap.
no snmp trap port-threshold
no snmp trap temp-threshold
no snmp trap dhcp-lease
no snmp trap fan
no snmp trap power
no snmp trap module

When you use the no snmp command, all configurations concerning SNMP will be

! deleted.

A50010-Y3-C150-2-7619 111