Siemens S223, S323 Domain Name, Dhcp Server Option, Static Mapping, Recognition of Dhcp Client

User Manual	UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

8.8.1.8Domain Name

To set a domain name, use the following command.

Command	Mode	Description
domain-name DOMAIN	DHCP Pool	Sets a domain name.
no domain-name		Deletes a specified domain name.

8.8.1.9DHCP Server Option

If a DHCP server option is specified, the DHCP server will respond only to DHCP mes- sages that carry the same option information.

To specify a DHCP server option, use the following command.

Command	Mode	Description
option <1-254> [<1-8>]		Specifies a DHCP option.
		1-254: DHCP option code
{ip A.B.C.D hex HEXSTRING
	DHCP Pool	1-8: instance number of the option code
text STRING}
		ip hex text: DHCP option information
no option <1-254> [<1-8>]		Deletes a specified DHCP option.

!	The already-defined DHCP option codes or the DHCP option codes only for the DHCP
	client cannot be specified with this command, e.g. option 82.

8.8.1.10Static Mapping

The hiD 6615 S223/S323 provides a static mapping function that enables to assign a static IP address without manually specifying static IP assignment by using a DHCP lease database in the DHCP database agent.

To perform a static mapping, use the following command.

Command	Mode	Description
		Performs a static mapping.
origin file A.B.C.D FILE	DHCP Pool	A.B.C.D: DHCP database agent address
		FILE: file name of DHCP lease database
no origin file		Cancels a static mapping.

i

For more information of the file naming of a DHCP lease database, see Section 8.8.3.1.

8.8.1.11Recognition of DHCP Client

Normally, a DHCP server recognizes DHCP clients with a client ID. However, some DHCP clients may not have their own client ID. In this case, you can select the recogni- tion method as a hardware address instead of a client ID.

A50010-Y3-C150-2-7619 243