Siemens S323 Items Description Source address or interface, Type of service, Data pattern 0xABCD

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

The following is the information to use ping test for multiple IP addresses.

Items	Description
Source address or interface	Designates the address where the relative device should respond in
	source ip address.
Type of service [0]:	The service filed of QoS (Quality Of Service) in Layer 3 application. It
	is possible to designate the priority for IP Packet.
	Decides whether Don’t Fragment (DB) bit is applied to Ping packet or
	not. Default is no. If the user choose ‘yes’, when the packets pass
Set DF bit in IP header? [no]	through the segment compromised with the smaller data unit, it pre-
	vents the packet to be Fragment. Therefore there could be error mes-
	sage.
Data pattern [0xABCD]	Configures data pattern. Default is OxABCD.

Tab. 6.3 Options for Ping for Multiple IP Addresses

The following is to verify network status between 172.16.157.100 and 172.16.1.254 when IP address of the switch is configured as 172.16.157.100.

SWITCH# ping Protocol [ip]:

Target IP address: 172.16.1.254

Repeat count [5]: 5

Datagram size [100]: 100

Timeout in seconds [2]: 2

Extended commands [n]: y

Source address or interface: 172.16.157.100

Type of service [0]: 0

Set DF bit in IP header? [no]: no Data pattern [0xABCD]:

PATTERN: 0xabcd

PING 172.16.1.254 (172.16.1.254) from 172.16.157.100 : 100(128) bytes of data.

108bytes from 172.16.1.254: icmp_seq=1 ttl=255 time=30.4 ms

108bytes from 172.16.1.254: icmp_seq=2 ttl=255 time=11.9 ms

108bytes from 172.16.1.254: icmp_seq=3 ttl=255 time=21.9 ms

108bytes from 172.16.1.254: icmp_seq=4 ttl=255 time=11.9 ms

108bytes from 172.16.1.254: icmp_seq=5 ttl=255 time=30.1 ms

--- 172.16.1.254 ping statistics ---

5packets transmitted, 5 received, 0% packet loss, time 8050ms rtt min/avg/max/mdev = 11.972/21.301/30.411/8.200 ms

SWITCH#

96 A50010-Y3-C150-2-7619