Siemens S223, S323 Max New Hosts, To display configured max host, use the following command

User Manual			UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
	Command	Mode	Description
			Limits the number of connection to a port by setting
	max-hosts PORTS <1-16>		maximum host:
		Bridge	PORTS: enter the port number.
			1-16: enter the maximum MAC number.
	no max-hosts PORTS		Deletes configured max-host, enter the port number.

The following is an example of configuring to allow two MAC addresses to port 3, and five addresses to port 1, 2, and to ten addresses to port 7.

SWITCH(bridge)# max-hosts3 2

SWTICH(bridge)# max-hosts1 5

SWTICH(bridge)# max-hosts2 5

SWTICH(bridge)# max-hosts7 10

SWTICH(bridge)#

To display configured max host, use the following command.

Command	Mode	Description
	Enable
show max-hosts	Global	Shows configured max host.
	Bridge

The following is an example of displaying configured max hosts.

SWITCH(bridge)# show max-hosts

port	1	:	0/5	(current/max)
port	2	:	0/5	(current/max)
port	3	:	0/2	(current/max)
port	4	:	0/Unlimited (current/max)
port	5	:	0/Unlimited (current/max)
port	6	:	0/Unlimited (current/max)
port	7	:	0/10	(current/max)
port	8	:	0/Unlimited (current/max)
port	9	:	0/Unlimited (current/max)
port 10 :			0/Unlimited (current/max)

7.9.1Max New Hosts

Max-new-hosts feature is to limit the number of users by configuring the number of MAC address that can be learned on the system and on the port for a second. The number of MAC address that can be learned on the system has the priority.

A50010-Y3-C150-2-7619 157