Siemens S323 Enabling FTP Server, System Temperature, System Memory, Threshold temp Value Value

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

6.1.12.4System Temperature

To set a threshold of system temperature, use the following command.

Command	Mode	Description
		Sets a threshold of system temperature in the unit of
threshold temp VALUE VALUE	Global	centigrade (°C).
		VALUE: Threshold temperature between -40 ~ 100
no threshold temp		Deletes a configured threshold of system temperature.

To show a configured threshold of system temperature, use the following command.

Command	Mode	Description
show status temp	Enable	Shows a status and configured threshold of system
	Global	temperature.

6.1.12.5System Memory

To set a threshold of system memory in use, use the following command.

Command	Mode	Description
		Sets a threshold of system memory in the unit of per-
threshold memory <20-100>	Global	cent (%).
		20-100: system memory in use
no threshold memory		Deletes a configured threshold of system memory.

6.1.13Enabling FTP Server

FTP server is enabled on hiD 6615 S223/S323 by default. But this configuration can’t provide the security serveice becaue it’s easy to access to the port #23 by others. If the default configuration is unnecessary on sysem, user can disable the system as FTP server.

To enable/disable the system of hiD S223/S323 as FTP server, use the following com- mand.

Command	Mode	Description
ftp server {enableㅣdisable}	Global	Enables/ disables the function for FTP serve
		Default: enable

The follwing is an example of displaying the status of FTP server.

SWITCH(config)# ftp server disable

SWITCH(config)# show running-config

(Omitted)

!

ftp server disable (Omitted) SWTICH(config)#

90 A50010-Y3-C150-2-7619