Siemens S323, S223 Rmon Event, Activating Rmon Alarm, Deleting Configuration of Rmon Alarm

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

To configure interval of sample inquiry for RMON alarm, use the following command.

Command	Mode	Description
sample-interval <0-65535>	RMON	Configures interval of sample inquiry.
		(unit: second)

7.4.2.8Activating RMON Alarm

After finishing all configurations, you need to activate RMON alarm. To activate RMON alarm, use the following command.

Command	Mode	Description
active	RMON	Activates RMON alarm.

7.4.2.9Deleting Configuration of RMON Alarm

When you need to change a configuration of RMON alarm, you should delete an existing RMON alarm.

To delete RMON alarm, use the following command.

Command	Mode	Description
no rmon-alarm <1-65535>	Global	Deletes RMON history of specified number, enter the
		value for deleting.

7.4.2.10Displaying RMON Alarm

To display RMON alarm, use the following command.

Command		Mode	Description
show running-config	rmon-	All	Shows a configured RMON alarm.
alarm

7.4.3RMON Event

RMON event identifies all operations such as RMON alarm in the switch. You can config- ure event or trap message to be sent to SNMP management server when sending RMON alarm.

You need to open RMON Event Configuration mode to configure RMON event.

Command	Mode	Description
rmon-event <1-65535>	Global	Opens RMON Event Configuration mode.
		1-65535: index number

7.4.3.1Event Community

When RMON event is happened, you need to input community to transmit SNMP trap message to host. Community means a password to give message transmission right.

132 A50010-Y3-C150-2-7619