Siemens S323 Route Map, Force Shutdown, To create a BGP Peer Group, use the following command

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

To create a BGP Peer Group, use the following command.

Command	Mode	Description
neighbor NAME peer-group		Create a BGP peer group.
	Router	NAME: peer group name
no neighbor NAME peer-group		Delete the BGP peer group created before.

To specify neighbor to the created peer group, use the following command.

Command	Mode	Description
		Includes BGP neighbor to specified peer group using
neighbor NEIGHBOR-IPpeer-		IP address.
group NAME	Router	NEIGHBOR-IP: neighbor IP address
		NAME: peer group name
no neighbor NEIGHBOR-IPpeer-		Removes BGP neighbor from the specified Peer
group NAME		Group.

10.1.4.3Route Map

You can apply the specific route map on neighboring router that the exchange route in- formation between routers or blocking the IP address range is configured on route map.

To make BGP Neighbor router exchange the routing information using Route-map, use the following command.

Command	Mode	Description
		Applies a route map to incoming or outgoing routes on
neighbor {NEIGHBOR-IP		neighboring router or peer group and exchange the
		route information.
GROUP} route-map NAME {in
		NEIGHBOR-IP: neighbor IP address
out}
	Router	GROUP: peer group name
		NAME: route map name
no neighbor {NEIGHBOR-IP
GROUP} route-map NAME {in		Removes the connection with configured route-map.
out}

10.1.4.4Force Shutdown

The hiD 6615 S323 supports the feature to force to shutdown any active session for the specified BGP router or peer group and to delete the routing data between them. It shut- downs all connections and deletes the received path information from neighboring router or peer group.

326 A50010-Y3-C150-2-7619