Siemens S323, S223 user manual Basic Configuration, Configuration Type of BGP, Enabling BGP Routing

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

10.1.1Basic Configuration

10.1.1.1Configuration Type of BGP

When configuring BGP, you can select BGP configuration type between standard BGP and ZebOS BGP for the hiD 6615 S323.

The standard BGP is one of the general BGP configuration type, which includes the fol- lowing restrictions.

•Manual transmission of community information

You should send the community information or message to neighbors directly using the neighbor {A.B.C.D WORD} send-communitycommand.

•No synchronization

Standard configuration type does not support a synchronization between IGP and eBGP. In this type, BGP network disables IGP synchronization in BGP by default.

•No auto-summary

Standard configuration type does not support auto summary feature. By default, the system disables the automatic network number summarization.

i

The ZebOS type requires no specific configuration for sending out BGP community and extended community attributes. ZebOS type is the default for the hiD 6615 S323.

To select configuration type of the BGP router, use the following command.

Command	Mode	Description
bgp config-type {standard ze-		Sets the BGP configuration type between standard and
bos}	Global	ZebOS.
no bgp config-type		Deletes the recent BGP configuration type and returns
		to default.

10.1.1.2Enabling BGP Routing

Step 1

To define an AS number and open Router Configuration mode, use the following com- mand.

Command	Mode	Description
		Assigns AS number to configure BGP routing and
router bgp <1-65535>	Global	opens Router Configuration mode.
		1-65535: AS number

318 A50010-Y3-C150-2-7619