Siemens S323 To disable monitoring function, use the following command, Enable mirroring function

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

Step 4

To delete and modify the configuration, use the following command.

Command	Mode	Description
mirror disable		Deactivate monitoring.
	Bridge
mirror del PORTS [ingress		Delete a port from the mirrored ports.
egress]

Step 5

To disable monitoring function, use the following command.

Command	Mode	Description
no mirror monitor	Bridge	Disable port mirroring function.

The following is an example of configuring port mirroring with a port.

Step 1

Connect a motoring PC to the monitor port of the switch.

Step 2

Enable mirroring function.

SWITCH(bridge)# mirror enable

SWITCH(bridge)#

Step 3

Configure the monitor port 1 and mirroring port 2, 3, 4 and 5.

SWITCH(bridge)# mirror monitor 1

SWITCH(bridge)# mirror add 2

SWITCH(bridge)# mirror add 3-5

SWITCH(bridge)#

Step 4

Check the configuration.

SWITCH(bridge)# show mirror Mirroring enabled

Monitor port =

-----------------------------------

1 123456789012

-----------------------------------

Ingress Mirrored Ports............

Egress Mirrored Ports............

SWITCH(bridge)#

82 A50010-Y3-C150-2-7619