Table 13 Distributed LAN Client and Server Commands
Chapter 4 Configuring StorNext
Configuring a Distributed LAN Client Server
Creating an Override Configuration
By default, the settings specified in the dpserver configuration file are used for all file systems mounted by the distributed LAN server. To use different settings for a file system, create an override configuration file for that file system. At the command prompt, type:
./sndpscfg
where <file system> is the name of the file system to which the override settings apply. Edit the configuration file, and then save and exit. A new configuration file with the name dpserver.<file system> is created in the /user/cvfs/config/ directory.
Using Distributed LAN Client and Server Commands
Use the cvadmin commands described in Table 13 to see information about distributed LAN servers and clients. (For more information about using cvadmin commands, see the CLI Reference Guide.)
Command | Description |
|
|
proxy | Lists all distributed LAN servers for the |
| currently selected file system. |
|
|
proxy long | Lists all distributed LAN servers for the |
| currently selected file system, as well as |
| tunable parameters and attached disks. |
|
|
proxy who <distributed LAN | Lists distributed LAN servers connected |
client> | to the specified distributed LAN client, as |
| well as current I/O statistics. |
|
|
proxy who <distributed LAN | Lists distributed LAN clients connected to |
server> | the specified distributed LAN server, as |
| well as current I/O statistics. |
|
|
StorNext 3.1.3 Installation Guide | 71 |
