
Appendix B StorNext Administration Tasks
Connecting to a StorNext Network Using Xsan 1.4.2
Connecting to a StorNext Network Using Xsan 1.4.2
Mounting SNFS on the OSx Computer
If you are using Apple Xsan 1.4.2, follow the procedure below to connect to a StorNext network. The procedure consists of mounting the StorNext file system onto the OSx computer, and then creating an automount.plist to enable mounting the StorNext file system whenever the Macintosh is rebooted.
Do not use the procedure if you are using Xsan2, which has a slightly different procedure described in Connecting to a StorNext Network Using Xsan 2 on page 119.
Follow this procedure to mount the StorNext file system.
1Connect the Apple computer to the SAN's metadata Ethernet and Fibre Channel networks.
2Install Xsan 1.4.2 software on the Apple computer.
3After Xsan 1.4.2 is installed, follow these steps to configure the software:
aOn the Apple client, open Xsan Admin, which is located under the Finder > Applications > Server folder, and then connect to the Apple computer.
bSelect the SAN in the SAN Components list.
cClick Setup, and then click Computers.
d
eEnter the Xsan serial number (printed on a sticker on the Xsan Installation disc sleeve).
fClick Save, and then quit Xsan Admin.
4Navigate to an existing StorNext client on the SAN and print a copy of its fsnameservers file.
On Unix: the fsnamerservers file is located at /usr/cvfs/config/.
StorNext 3.1.3 Installation Guide | 116 |