Chapter 4 Configuring StorNext
Windows Configuration Utilities
Caution: Modifying the label of a system disk may render the system inoperable and require you to repair the volume. Only label disk devices that are intended for use with the StorNext File System SAN.
To run the Disk Device Labeler utility, on the Windows Start menu, click
All Programs > StorNext File System > Disk Device Labeler. The Disk
Labeler window (figure 44) appears.
Figure 44 Disk Device Labeler
On the Disk Labeler window, do one of the following:
•Click Label to write a volume label to the selected device(s) (see Labeling Disks below).
•Click UnLabel to remove the existing volume label from the selected device(s).
•Click Exit to quit the Disk Device Labeler utility.
•Click Probe Disk(s) to pulse the activity light of the selected device(s). Use this feature to correctly identify disks before labeling them.
•Click Clear Selections to deselect all devices in the list.
StorNext 3.1.3 Installation Guide | 84 |
